Wash & Care

Fill the Basin: Fill a basin or sink with cool or lukewarm water. Avoid hot water, as it can damage delicate fabrics.

Add Detergent:
Add a small amount of mild detergent designed for delicates. Follow the detergent’s instructions for the appropriate amount.

Mix:
Gently agitate the water to create suds.

Submerge Hijab:
Place the hijab in the water. Make sure it’s fully
submerged.

Soak:
Let it soak for about 5 minutes. This helps loosen any
dirt or oils.

Swish:
Gently swish the hijab around in the water. Avoid scrubbing or twisting, as this can damage the fabric.

Gentle Cleaning:
Gently swish the hijab around. For areas around the embellished area, lightly use a soft cloth or sponge to dab the area. Avoid scrubbing or rubbing, which can damage the beads or crystals.

Drain the Water:
Carefully drain the soapy water from the basin.

Rinse:
Refill the basin with clean, cool water. Gently swish the hijab in the clean water to remove detergent.

Repeat if Needed:
If there is still soap residue, drain the water and refill the basin with fresh clean water, then rinse again.

Gently Squeeze:
Carefully lift the hijab out of the water and gently squeeze out excess water. Avoid wringing or twisting, which can stretch or damage the fabric.

Low Heat Setting:
Use the iron’s lowest heat setting, usually labeled as “Low” or with a symbol indicating delicate fabrics. For many irons, this is around 250°F to 300°F (120°C to 150°C).

Pressing Cloth:
To protect the chiffon and prevent the embellished area in direct contact with the iron, use a pressing cloth. Place a thin, clean cotton cloth between the iron and the hijab.